2GE+CATV+WiFi XPON ONU

Item No.: WK-3802AWC
2GE+WiFi5+USB3.0+CATV GPON/EPON ONT WiFi Mesh terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature Chipset (Realtek) technology, which have high ratio of performance to price, and the technology of  WiFi5(Dual band), Layer 2/3, and WiFi EasyMesh as well. Support full management of ONT devices through WOLCK OLT. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah,ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
Description Features Technical Parameter
Description

Gigabit Fiber XPON CATV ONT

XPON | Gigabit-LAN | CATV RF | USB3.0


EasyMesh: Smart, Extended Coverage Home WiFi


Support IPv6 and MU-MIMO Technology

Say goodbye to network lag, multiplayer online without lag


AC1200 Dual Gigabit Interfaces for Gigabit Broadband Access Applications


CATV with AGC

Remote Control CATV On/Off

Features
  • Dual Mode( can access gpon/epon olts ).
  • Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
  • Integrated OAM remote configuration and maintenance function.
  • Support rich QinQ VLAN functions and IGMP Snooping multicast features.
  • Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
  • Support 802.11n WiFi(2T2R) function.
  • Support NAT, Firewall function.
  • Support IPv4 and IPv6 dual stack.
  • Support SIP protocol
Technical Parameter
 Hardware Parameter
Dimension 178mm×120mm×30mm(L×W×H)
Net weight 0.28Kg
Operating condition Operating temp: 0 ~ +55°C
Operating humidity: 10 ~ 90%  (non-condensed)
Storing condition Storing temp: -30 ~ +60°C
Storing humidity: 10 ~ 90%  (non-condensed)
Power adapter DC 12V,1.5A, external AC-DC power adaptor
Power supply ≤12W
Interface 2GE+WiFi5+CATV+USB3.0
Indicators PWR, PON, LOS, WAN, LAN1, LAN2, 2.4G, 5G, CATV, USB
   
 Interface parameter
PON interface
  • 1 XPON port(EPON PX20+ & GPON Class B+)
  • SC single mode, SC/APC connector
  • TX optical power: 0+4dBm
  • RX sensitivity: -27dBm
  • Overload optical power: -3dBm(EPON) or -8dBm(GPON)
  • Transmission distance: 20KM
  • TX wavelength: 1310nm
  • RX wavelength: 1490nm, 1550nm(CATV)
CATV  interface
  • Optical receiving wavelength: 1550±10nm
  • RF frequency range: 471000MHz
  • Optical power input range: 0-3dBm
  • RF output impedance: 75Ω
  • RF output level: 5060dBuV(0-3dBm optical input with AGC)
  • MER: ≥32dB(-3dBm optical input)
WiFi interface
  • Compliant with IEEE802.11b/g/n/ac
  • 2.4GHz Operating frequency: 2.400-2.483GHz
  • 5.0GHz Operating frequency: 5.150-5.825GHz
  • WiFi: 2.4GHz( 2T2R ), 5.8GHz( 2T2R ), 5dBi antenna, support: multiple SSID
  • TX power: 11n–22dBm/11ac–24dBm
LAN interface 2*GE,Auto-negotiation,RJ45 ports
USB interface USB3.0 For Printer&Storage
 Function Data
Management
  • OAM/OMCI, Telnet, WEB, TR069
  • Support full management of ONT functions by VSOL OLT
Data Service Functions
  • Full speed non-blocking switching
  • 2K MAC address table
  • 64 full range VLAN ID
  • Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc
  • Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc
  • Support auto polarity detection of Ethernet ports (AUTO MDIX)
  • Integrated IEEE802.1p QoS with four level priority queues
  • Support IGMP v1/v2/v3 snooping/proxy and MLD v1/v2 snooping/proxy
  • Support bridge, router and bridge/router mixed mode
  • IP address assignment: dynamic PPPoE/DHCP Client and static IP
Wireless
  • Integrated 802.11b/g/n/ac(WIFI5)
  • Support Easymesh protocol
  • Authentication: WEP/WAP-PSK(TKIP)/WAP2-PSK(AES)
  • Modulation type: DSSS, CCK and OFDM
  • Encoding scheme: BPSK, QPSK,16QAM and 64QAM
Send your message to us